| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Display: | Digital |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
| The instrument adopts LCD display |
| With current output, measurement range can be set freely |
| High and low over-limit alarm |
| Hysteresis range can be adjusted two groups of relay control switches |
| Automatic or manual temperature compensation |
| A variety of automatic calibration methods for electrodes |
| Display | 2.8", 320*240 | Interface | RS485 (Modbus/RTU) |
| Output | 0-20mA;4-20mA;20-4mA | Power Supply | 9-36VDC, ≤3W |
| Installation | Embedded | Power Requirements | 85-265VAC±10%, 50Hz, ≤3W |
| Relay Controlled Electric Shock | 3A 240VAC; 3A 28VDC or 120VAC; |
Size | 98*98*130mm |
| Weight | 0.5kg | Material | ABS mixed glass fiber |
| Operating Temperature | (-10-60)ºC | Protection Level | IP65 |
| Resolution | 0.01 pH; 1mV(ORP) | Cable | 5m or customizable |
|
| Reacts quickly to changes in dissolved oxygen levels, providing accurate and real-time data. |
| Operates without the need for electrolyte or cathodes, ensuring stable and corrosion-free performance. |
| Unaffected by water flow rate, making it suitable for stagnant or dynamic water environments. |
| Highly resistant to chemical substances like sulfides, ensuring stable and precise measurements without signal drift. |
| Measuring Range | 2-20mg/L | Measurement Principle | Fluorescence |
| Size | Φ16mm*162mm | Stability | <0.3mg/L/year |
| Accuracy | 0.3mg/L | Temperature Compensation | NTC10K/PT1000 |
| Response Time | T90<120S | Protection Level | IP68 |
| Interface | RS-485 & 4-20mA | Material | ABS, 316 Stainless Steel |
| Power Requirements | 7~28VDC (<0.2W) | Operation Pressure | 0.8Mpa |
| Operation Temperature | (0~60)ºC | Cable Length | 5m or customizable |
| Warranty | 1 year | ||
){kind=link}